Product Description
Designed to protect the rear suspension linkage from direct impacts caused by rocks, stones, logs and hard ground during Enduro and Hard Enduro riding.
The suspension linkage is positioned underneath the motorcycle and is highly exposed to impacts, scraping and direct ground contact when riding through rocky and technical terrain.
The 5 mm PE plastic construction creates a durable, low-friction protective surface underneath the linkage, helping reduce the risk of impact and abrasion damage while allowing the motorcycle to slide more easily over rocks, logs and other trail obstacles.
Developed specifically for the new-generation Rieju 250/300 2-stroke chassis and the mounting geometry of the compatible Motoes protection plate.
When installed together with the compatible Motoes lower skid plate / protection plate, the link guard extends protection from underneath the engine toward the rear suspension linkage.
Key Features
• Protects the rear suspension linkage from direct impacts
• 5 mm PE plastic construction
• Helps protect against rocks, stones, logs and hard ground
• Low-friction surface helps the motorcycle slide over trail obstacles
• Designed for the new-generation Rieju 250/300 2T chassis
• Compatible with Motoes protection plate SKU (SKD-RJ25_ANA)
• Extends underbody protection toward the rear suspension linkage
• Suitable for Enduro and Hard Enduro riding
• Suitable for Cross Country and Off-Road use
• Helps reduce scraping and direct impact exposure underneath the motorcycle
Technical Information / Material
• Product type: Rear suspension linkage guard
• Material: PE plastic
• Thickness: 5 mm
• Engine type: 250/300 cc 2-stroke
• Mounting type: Installs onto the compatible Motoes lower skid plate / protection plate
• Compatible protection system: SKU (SKD-RJ25_ANA)
• General fitment range: 2025-2027
• Product SKU: MT-LINK-RJTB25
Recommended Use
• Enduro
• Hard Enduro
• Cross Country
• Off-Road
• Technical off-road riding
• Rocky terrain
• Rock steps
• Log crossings
• Forest and mountain trails
• Riding conditions where the suspension linkage is exposed to direct ground contact
Especially useful on technical terrain where the underside of the motorcycle may slide across rocks or hard ground and expose the rear suspension linkage to direct impacts.
Fitment
Rieju – 2T
250 2T – 2025-2027
300 2T – 2025-2027
Compatible Lower Skid Plate / Protection Plate
Rieju 250/300 2T Protection Plate 2025-2027
SKU (SKD-RJ25_ANA)
Installation Information
• The product is designed around the rear suspension linkage and underbody geometry of the new-generation Rieju 250/300 2T models.
• Clean the lower skid plate and mounting areas before installation.
• Install the link guard onto the designated mounting points of the compatible Motoes protection plate.
• Make sure the rear suspension can move freely through its full range after installation.
• Check that the link guard does not make unwanted contact with the exhaust, frame or other moving components.
• Make sure all mounting screws are securely tightened.
• Recheck all mounting points after the first off-road ride.
Package Contents
• Link guard
• Installation screws
Important Note
This product is not a standalone bash plate or lower skid plate.
It is designed specifically for use with:
Rieju 250/300 2T Protection Plate 2025-2027
SKU (SKD-RJ25_ANA)
This product should not be confused with the previous-generation protection systems used on 2021-2024 Rieju 250/300 models. The newer chassis uses a different mounting and frame geometry.
Before ordering, make sure your motorcycle model, production year and installed Motoes protection plate SKU match the information listed above.
Maintenance / Cleaning
• Remove mud, stones and debris collected around the link guard after off-road riding.
• Regularly inspect the area between the linkage and the guard.
• Check mounting points after intensive off-road riding and washing.
• Inspect the PE surface for deformation, cracks or excessive wear after hard impacts.
• Remove any debris that could interfere with rear suspension movement.
• Check and retighten loose mounting points before continuing to ride.
• Do not use strong or abrasive chemicals.
Motoes Production
This product is developed and manufactured by Motoes specifically for the rear suspension linkage geometry of the new-generation Rieju 250/300 2-stroke motorcycles and the mounting geometry of the compatible Motoes lower skid plate / protection plate.
The design focuses on protecting the suspension linkage from direct impacts, maintaining correct integration with the compatible protection system, preserving unrestricted suspension movement and providing reliable protection in demanding Enduro and Hard Enduro conditions.