Product Description
Designed to help protect the rear suspension linkage from impacts and abrasion caused by rocks, stones, logs and hard ground during Adventure and Off-Road riding.
The suspension linkage is positioned underneath the motorcycle and is highly exposed to direct ground contact when riding through rocky and technical terrain.
The HDPE construction creates a durable and low-friction protective surface underneath the linkage, helping reduce impact and abrasion while allowing the underside of the motorcycle to slide more easily over rocks, logs and other trail obstacles.
Designed specifically for the CF Moto 450MT and the mounting geometry of the compatible Motoes bash plate.
When installed together with the compatible Motoes protection system, the link guard extends the protection area from underneath the engine toward the rear suspension linkage.
Key Features
• Protects the rear suspension linkage from impacts and abrasion
• Durable HDPE construction
• Helps protect against rocks, stones, logs and hard ground
• Low-friction skid surface helps the motorcycle slide over obstacles
• Designed specifically for the CF Moto 450MT
• Compatible with Motoes bash plate SKU (BPPG-450MT-W-MAIN)
• Extends underbody protection toward the rear suspension linkage
• Suitable for Adventure and Off-Road riding
• Suitable for rocky and technical terrain
• Helps reduce direct ground contact around the linkage area
Technical Information / Material
• Product type: Rear suspension linkage guard / skid
• Material: HDPE
• Mounting type: Installs onto the compatible Motoes bash plate
• Compatible protection system: SKU (BPPG-450MT-W-MAIN)
• General fitment range: 2024-2026
• Product SKU: MT-LINK-450CF
Recommended Use
• Adventure
• Off-Road
• Technical off-road riding
• Rocky terrain
• Stone-covered roads
• Rock steps
• Log crossings
• Rough trails
• Riding conditions where the rear suspension linkage is exposed to direct ground contact
Especially useful in technical terrain where the engine underside and rear suspension linkage area may come into contact with rocks or hard ground.
Fitment
CF Moto
450MT – 2024-2026
Compatible Bash Plate
CF Moto 450MT Bash Plate 2024-2026
SKU (BPPG-450MT-W-MAIN)
Installation Information
• The product is designed around the rear suspension linkage and underbody geometry of the CF Moto 450MT.
• Clean the bash plate and mounting areas before installation.
• Install the link guard onto the designated mounting points of the compatible Motoes bash plate.
• Make sure the rear suspension can move freely after installation.
• Check that the link guard does not make unwanted contact with the exhaust, frame or moving suspension components.
• Make sure all mounting points are securely tightened.
• Recheck all mounting points after the first off-road ride.
Package Contents
• Link guard
• Installation screws
Important Note
This product is not a standalone bash plate.
It is designed specifically for use with:
CF Moto 450MT Bash Plate 2024-2026
SKU (BPPG-450MT-W-MAIN)
Different Motoes bash plate models may use different mounting geometries. Compatibility should therefore not be determined only by motorcycle model and production year.
Before ordering, make sure your motorcycle model, production year and installed Motoes bash plate SKU match the information listed above.
Maintenance / Cleaning
• Remove mud, stones and debris collected around the link guard after off-road riding.
• Regularly inspect the area between the linkage and the guard.
• Check mounting points after intensive off-road riding and washing.
• Inspect the HDPE surface for deformation, cracks or excessive wear after hard impacts.
• Remove any debris that could interfere with suspension movement.
• Check and retighten loose mounting points before continuing to ride.
• Do not use strong or abrasive chemicals.
Motoes Production
This product is developed and manufactured by Motoes specifically for the rear suspension linkage geometry of the CF Moto 450MT and the mounting geometry of the compatible Motoes bash plate.
The design focuses on protecting the linkage from impacts, reducing friction over trail obstacles, maintaining correct integration with the compatible bash plate and providing reliable protection in demanding Adventure and Off-Road conditions.