Product Description
Designed to protect the rear suspension linkage from direct impacts caused by rocks, stones, logs and hard ground during Enduro and Hard Enduro riding.
The suspension linkage is located underneath the motorcycle and is highly exposed to impacts, scraping and direct ground contact when riding over rocks and other technical trail obstacles.
The 5 mm PE plastic construction creates a durable, low-friction protective surface underneath the linkage, helping reduce the risk of impact and abrasion damage.
Designed specifically for compatible KTM/Husqvarna/GasGas 4-stroke models and the mounting geometry of the Motoes bash plate SKU (SKD4-24000-B_ANA).
When installed together with the compatible Motoes protection system, the link guard extends protection from underneath the engine toward the rear suspension linkage.
Key Features
• Protects the rear suspension linkage from direct impacts
• 5 mm PE plastic construction
• Helps protect against rocks, stones, logs and hard ground
• Low-friction surface helps the motorcycle slide over trail obstacles
• Designed for compatible KTM/Husqvarna/GasGas 4-stroke models
• Compatible with Motoes bash plate SKU (SKD4-24000-B_ANA)
• Extends underbody protection toward the rear suspension linkage
• Suitable for Enduro and Hard Enduro riding
• Suitable for Cross Country and technical off-road riding
• Helps reduce scraping and direct impact exposure underneath the motorcycle
Technical Information / Material
• Product type: Rear suspension linkage guard
• Material: PE plastic
• Thickness: 5 mm
• Engine type: 4-stroke
• Mounting type: Installs onto the compatible Motoes bash plate
• Compatible bash plate: SKU (SKD4-24000-B_ANA)
• General fitment range: 2024-2027
• Product SKU: MT-LINK-4TKT24
Recommended Use
• Enduro
• Hard Enduro
• Cross Country
• Technical off-road riding
• Rocky terrain
• Rock steps
• Log crossings
• Forest and mountain trails
• Riding conditions where the suspension linkage is exposed to direct ground contact
Especially useful on technical terrain where the underside of the motorcycle may slide across rocks or hard ground and expose the rear suspension linkage to direct impacts.
Fitment
KTM – 4T
350 EXC-F – 2024-2027
450 XCF-W – 2024-2027
500 EXC-F – 2024-2027
Husqvarna – 4T
250 FE – 2024-2027
350 FE – 2024-2027
450 FE – 2024-2027
501 FE – 2024-2027
GasGas – 4T
350 EC – 2024-2027
450F EC – 2024-2027
500 EC – 2024-2027
250F MC – 2024-2027
350F MC – 2024-2027
450F MC – 2024-2027
The model/year fitment above follows the current TR product page. motoes.com.tr
Compatible Bash Plate
KTM/Husqvarna/GasGas 250-501 4T Bash Plate 2024-2027
SKU (SKD4-24000-B_ANA)
Installation Information
• Clean the bash plate and mounting areas before installation.
• Install the link guard onto the dedicated mounting points of the compatible Motoes bash plate.
• Make sure the rear suspension can move freely through its full range after installation.
• Check that the link guard does not make unwanted contact with the exhaust, frame or other moving components.
• Make sure all mounting screws are securely tightened.
• Recheck all mounting points after the first off-road ride.
Package Contents
• Link guard
• Installation screws
Important Note
This product is not a standalone bash plate.
It is designed specifically for use with:
KTM/Husqvarna/GasGas 250-501 4T Bash Plate 2024-2027
SKU (SKD4-24000-B_ANA)
Different Motoes bash plate models may use different mounting geometries. Compatibility should therefore not be determined only by motorcycle model and production year.
Before ordering, make sure your motorcycle model, production year and installed Motoes bash plate SKU match the information listed in the Fitment section.
Maintenance / Cleaning
• Remove mud, stones and debris collected around the link guard after off-road riding.
• Regularly inspect the area between the linkage and the guard.
• Check the mounting points after intensive off-road riding and washing.
• Inspect the PE surface for deformation, cracks or excessive wear after hard impacts.
• Remove any debris that could interfere with rear suspension movement.
• Check and retighten loose mounting points before continuing to ride.
• Do not use strong or abrasive chemicals.
Motoes Production
This product is developed and manufactured by Motoes specifically for the rear suspension linkage geometry of compatible KTM/Husqvarna/GasGas 4-stroke motorcycles and the mounting geometry of the Motoes bash plate SKU (SKD4-24000-B_ANA).
The design focuses on protecting the suspension linkage from direct impacts, maintaining correct integration with the bash plate, preserving unrestricted suspension movement and providing reliable protection in demanding Enduro and Hard Enduro conditions.