Product Description
Designed to protect the rear suspension linkage from direct impacts caused by rocks, stones, logs and hard ground during Enduro and Hard Enduro riding.
The linkage system is located underneath the motorcycle and is highly exposed to impacts and scraping when passing over rocks, logs and other technical trail obstacles.
The 5 mm PE plastic construction creates a durable, low-friction protective surface underneath the linkage, helping reduce the risk of impact, abrasion and direct ground contact.
Designed specifically for the new-generation KTM/Husqvarna/GasGas 250/300 TBI 2-stroke platform, this link guard works together with compatible Motoes bash plate and skid plate systems to extend protection from underneath the engine toward the rear suspension linkage.
Key Features
• Protects the rear suspension linkage from direct impacts
• 5 mm PE plastic construction
• Additional protection against rocks, stones, logs and hard ground
• Low-friction surface helps the motorcycle slide over trail obstacles
• Designed for KTM/Husqvarna/GasGas 250/300 TBI 2-stroke models
• Compatible with multiple Motoes bash plate systems
• Compatible with standard, black, FMF Gnarly and FMF Fatty protection systems
• Can also be used with the compatible Motoes lower skid plate
• Extends underbody protection toward the suspension linkage
• Suitable for Enduro and Hard Enduro use
Technical Information / Material
• Product type: Rear suspension linkage guard
• Material: PE plastic
• Thickness: 5 mm
• Engine platform: 250/300 TBI 2-stroke
• Mounting type: Installs onto a compatible Motoes bash plate or skid plate
• General fitment range: 2024-2027
Recommended Use
• Enduro
• Hard Enduro
• Cross Country
• Technical off-road riding
• Rocky terrain
• Rock steps
• Log crossings
• Forest and mountain trails
• Riding conditions where the rear suspension linkage is exposed to direct ground contact
Especially useful on technical terrain where the underside of the motorcycle may slide across rocks, logs or hard ground and expose the suspension linkage to direct impacts.
Fitment
KTM
• EXC 250 / 300 TBI – 2024-2027
• XC-W 250 / 300 TBI – 2024-2027
• XC 250 / 300 TBI – 2024-2027
• SX 250 / 300 TBI – 2024-2027
Husqvarna
• TE 250 / 300 TBI – 2024-2027
• TX 250 / 300 TBI – 2024-2027
• TC 250 / 300 TBI – 2024-2027
GasGas
• EC 250 / 300 TBI – 2024-2027
• MC 250 / 300 TBI – 2024-2027
Compatible Bash Plates
KTM/Husqvarna/GasGas 250/300 TBI Bash Plate with Pipe Guard
SKU (BPPG-24000_ANA)
 
KTM/Husqvarna/GasGas 250/300 TBI Black Bash Plate with Pipe Guard
SKU (BPPG-24000B+Link_ANA)
 
FMF Gnarly Compatible KTM/Husqvarna/GasGas 250/300 TBI Bash Plate with Pipe Guard
SKU (FMF-GN-24000B_ANA)
 
FMF Fatty Compatible KTM/Husqvarna/GasGas 250/300 TBI Bash Plate with Pipe Guard
SKU (FMF)
 
Compatible Lower Skid Plate
KTM/Husqvarna/GasGas 250/300 TBI 2T Skid Plate
SKU (CGBS-24000-B_ANA)
 
Installation Information
• Make sure the Motoes bash plate or skid plate installed on the motorcycle is one of the compatible products listed above.
• Clean all mounting areas before installation.
• Secure the link guard to the dedicated mounting points on the compatible Motoes protection system.
• After installation, check that the rear suspension moves freely through its full range.
• Make sure the guard does not contact the exhaust, frame or any moving component.
• Recheck all mounting points after the first off-road ride.
Package Contents
• Link guard
• Installation screws
Important Note
This product is not a standalone bash plate or skid plate.
It is designed to be used together with compatible Motoes protection systems for the KTM 24-27 TBI series and equivalent-generation Husqvarna/GasGas platforms.
Before ordering, make sure your motorcycle model, production year and installed Motoes bash plate or skid plate match one of the products listed in the Fitment section.
Bash plates designed for FMF Gnarly and FMF Fatty exhaust systems use different exhaust geometries. Make sure the bash plate version matches the exhaust installed on the motorcycle.
Maintenance / Cleaning
• Remove mud, stones and debris collected around the link guard after off-road riding.
• Regularly inspect the area between the linkage and the guard.
• Check mounting points after intensive off-road riding and washing.
• Inspect the PE surface for deformation, cracks or excessive wear after hard impacts.
• Remove any debris that could interfere with rear suspension movement.
• Check and retighten loose mounting points before continuing to ride.
• Do not use strong or abrasive chemicals.
Motoes Production
This product is developed and manufactured by Motoes specifically for the rear suspension linkage geometry of KTM/Husqvarna/GasGas 250/300 TBI 2-stroke motorcycles and the mounting geometry of compatible Motoes bash plate and skid plate systems.
The design focuses on compatibility with different Motoes protection systems, protecting the linkage from direct impacts, maintaining unrestricted suspension movement and providing reliable protection in demanding Enduro and Hard Enduro conditions.