Product Description
Designed to protect the rear suspension linkage from direct impacts caused by rocks, stones, logs and hard ground during Enduro and Hard Enduro riding.
The suspension linkage is located underneath the motorcycle and is highly exposed to impacts, scraping and direct ground contact when riding over rocks and other technical trail obstacles.
The 5 mm PE plastic construction creates a durable, low-friction protective surface underneath the linkage, helping reduce the risk of impact and abrasion damage.
When installed together with the compatible Motoes bash plate / skid plate, it extends the protection area from underneath the engine toward the rear suspension linkage.
Key Features
• Protects the rear suspension linkage from direct impacts
• 5 mm PE plastic construction
• Helps protect against rocks, stones, logs and hard ground
• Low-friction surface helps reduce dragging over trail obstacles
• Designed for compatible KTM and Husqvarna 125/250/300 2-stroke models
• Compatible with Motoes protection system SKU (SKD-20000-B-1_ANA)
• Extends underbody protection toward the rear suspension linkage
• Suitable for Enduro and Hard Enduro riding
• Suitable for Cross Country and technical off-road riding
• Helps reduce scraping and direct impact exposure underneath the motorcycle
Technical Information / Material
• Product type: Rear suspension linkage guard
• Material: PE plastic
• Thickness: 5 mm
• Engine type: 2-stroke
• Mounting type: Installs onto the compatible Motoes bash plate / skid plate
• Compatible protection system: SKU (SKD-20000-B-1_ANA)
• General fitment range: 2019-2023
Recommended Use
• Enduro
• Hard Enduro
• Cross Country
• Technical off-road riding
• Rocky terrain
• Rock steps
• Log crossings
• Forest and mountain trails
• Riding conditions where the suspension linkage is exposed to direct ground contact
Especially useful on technical terrain where the underside of the motorcycle may slide across rocks or hard ground and expose the rear suspension linkage to direct impacts.
Fitment
KTM – 2T
125 XC – 2019-2022
250 XC – 2019-2022
300 XC – 2019-2022
125 SX – 2019-2022
250 SX – 2019-2022
300 SX – 2019-2022
125 EXC TPI – 2020-2023
250 EXC TPI – 2020-2023
300 EXC TPI – 2020-2023
125 XC-W TPI – 2020-2023
250 XC-W TPI – 2020-2023
300 XC-W TPI – 2020-2023
Husqvarna – 2T
125 TX – 2019-2022
250 TX – 2019-2022
300 TX – 2019-2022
125 TE – 2020-2023
250 TE – 2020-2023
300 TE – 2020-2023
Compatible Bash Plate / Skid Plate
KTM/Husqvarna 125/250/300 2T Bash Plate / Skid Plate 2019-2023
SKU (SKD-20000-B-1_ANA)
Installation Information
• Clean the bash plate / skid plate and mounting areas before installation.
• Install the link guard onto the designated mounting points of the compatible Motoes protection system.
• Make sure the rear suspension can move freely after installation.
• Check that the link guard does not make unwanted contact with the exhaust, frame or other moving components.
• Make sure all mounting screws are securely tightened.
• Recheck all mounting points after the first off-road ride.
Package Contents
• Link guard
• Installation screws
Important Note
This product is not a standalone bash plate or skid plate.
It is designed specifically for use with:
KTM/Husqvarna 125/250/300 2T Bash Plate / Skid Plate 2019-2023
SKU (SKD-20000-B-1_ANA)
Different Motoes protection systems may use different mounting geometries. Compatibility should therefore not be determined only by motorcycle model and production year.
Before ordering, make sure your motorcycle model, production year and installed Motoes protection system SKU match the information listed above.
Maintenance / Cleaning
• Remove mud, stones and debris collected around the link guard after off-road riding.
• Regularly inspect the area between the linkage and the guard.
• Check the mounting points after intensive off-road riding and washing.
• Inspect the PE surface for deformation, cracks or excessive wear after hard impacts.
• Remove any debris that could interfere with rear suspension movement.
• Check and retighten loose mounting points before continuing to ride.
• Do not use strong or abrasive chemicals.
Motoes Production
This product is developed and manufactured by Motoes specifically for the rear suspension linkage geometry of compatible KTM and Husqvarna 125/250/300 2-stroke motorcycles and the mounting geometry of the Motoes protection system SKU (SKD-20000-B-1_ANA).
The design focuses on protecting the suspension linkage from direct impacts, maintaining correct integration with the compatible protection system, preserving suspension movement and providing reliable protection in demanding Enduro and Hard Enduro conditions.