Product Description
Designed to protect the rear suspension linkage from direct impacts caused by rocks, stones, logs and hard ground during Enduro and Hard Enduro riding.
The suspension linkage is located underneath the motorcycle and is highly exposed to impacts, scraping and direct ground contact when riding over rocks and other technical trail obstacles.
The 5 mm PE plastic construction creates a durable, low-friction protective surface underneath the linkage, helping reduce the risk of impact and abrasion damage.
Designed specifically for the suspension geometry of KTM 150 EXC / XC-W and Husqvarna 150 TE models, as well as the mounting structure of the compatible Motoes bash plate with pipe guard.
When installed together with the compatible Motoes protection system, the link guard extends the protection area from underneath the engine toward the rear suspension linkage.
Key Features
• Protects the rear suspension linkage from direct impacts
• 5 mm PE plastic construction
• Helps protect against rocks, stones, logs and hard ground
• Low-friction surface helps the motorcycle slide over trail obstacles
• Designed specifically for KTM 150 EXC / XC-W and Husqvarna 150 TE models
• Compatible with Motoes bash plate SKU (BPPG-15000-12_ANA)
• Extends underbody protection toward the rear suspension linkage
• Suitable for Enduro and Hard Enduro riding
• Suitable for Cross Country and technical off-road riding
• Helps reduce scraping and direct impact exposure underneath the motorcycle
Technical Information / Material
• Product type: Rear suspension linkage guard
• Material: PE plastic
• Thickness: 5 mm
• Mounting type: Installs onto the compatible Motoes bash plate
• Compatible bash plate: SKU (BPPG-15000-12_ANA)
• General fitment range: 2020-2023
Recommended Use
• Enduro
• Hard Enduro
• Cross Country
• Technical off-road riding
• Rocky terrain
• Rock steps
• Log crossings
• Forest and mountain trails
• Riding conditions where the suspension linkage is exposed to direct ground contact
Especially useful on technical terrain where the underside of the motorcycle may slide across rocks, logs or hard ground and expose the rear suspension linkage to direct impacts.
Fitment
KTM – 2T
150 EXC – 2020-2023
150 XC-W – 2020-2023
Husqvarna – 2T
150 TE – 2020-2023
Compatible Bash Plate
KTM 150 EXC/XC-W & Husqvarna 150 TE Bash Plate with Pipe Guard 2020-2023
SKU (BPPG-15000-12_ANA)
Installation Information
• This product is designed around the mounting geometry of the compatible Motoes bash plate SKU (BPPG-15000-12_ANA).
• Clean the bash plate and mounting areas before installation.
• Secure the link guard to the appropriate mounting points on the compatible bash plate.
• After installation, make sure the rear suspension can move freely through its full range.
• Check that the link guard does not make unwanted contact with the exhaust, frame or other moving components.
• Recheck all mounting points after the first off-road ride.
Package Contents
• Link guard
• Installation screws
Important Note
This product is not a standalone bash plate.
It is designed specifically for use with:
KTM 150 EXC/XC-W & Husqvarna 150 TE Bash Plate with Pipe Guard 2020-2023
SKU (BPPG-15000-12_ANA)
Motoes protection systems designed for different engine sizes or motorcycle generations may use different mounting geometries.
Before ordering, make sure your motorcycle model, production year and installed Motoes bash plate SKU match the information listed in the Fitment section.
Maintenance / Cleaning
• Remove mud, stones and debris collected around the link guard after off-road riding.
• Regularly inspect the area between the linkage and the guard.
• Check the mounting points after intensive off-road riding and washing.
• Inspect the PE surface for deformation, cracks or excessive wear after hard impacts.
• Remove any debris that could interfere with rear suspension movement.
• Check and retighten loose mounting points before continuing to ride.
• Do not use strong or abrasive chemicals.
Motoes Production
This product is developed and manufactured by Motoes specifically for the rear suspension linkage geometry of KTM 150 EXC / XC-W and Husqvarna 150 TE 2020-2023 motorcycles, as well as the mounting geometry of the compatible Motoes bash plate.
The design focuses on protecting the suspension linkage from direct impacts, maintaining correct integration with the bash plate, preserving unrestricted suspension movement and providing reliable protection in demanding Enduro and Hard Enduro conditions.