Short Description
CNC-machined 6061-T6 aluminum rear suspension lowering link for selected KTM, Husqvarna and GasGas 2025 off-road motorcycles. Lowers the rear suspension by approximately 1.5 inches and features double-row needle bearings, grease fittings and heavy-duty seals for smooth, durable operation.
Product Description
1.5" Rear Lowering Link
Reduce rear ride height and improve low-speed confidence with this 1.5" Rear Lowering Link.
The linkage lowers the rear suspension by approximately 1.5 inches, making it easier for many riders to reach the ground when stopping or maneuvering the motorcycle at low speeds.
Manufactured from lightweight and durable 6061-T6 billet aluminum, the link is precision CNC-machined for accurate fitment and reliable suspension movement.
The linkage is equipped with double-row needle bearings for smooth operation and heavy-duty grease seals that help keep dirt and contaminants away from the bearing surfaces.
Integrated grease fittings allow routine lubrication without removing the linkage, helping extend bearing life and maintain smooth suspension performance.
Features
Lowers rear suspension approximately 1.5"
Helps reduce seat height
Easier ground reach when stopping
Helps improve low-speed rider confidence
CNC-machined 6061-T6 billet aluminum
Lightweight and durable construction
Double-row needle bearings
Smooth suspension movement
Integrated grease fittings
Allows lubrication without removing the linkage
Heavy-duty grease seals
Helps protect bearings from dirt and debris
Anodized surface treatment
Improved corrosion and wear resistance
Direct replacement design
Product Specifications
Product Type: Rear Suspension Lowering Link
Lowering Amount: Approx. 1.5"
Material: 6061-T6 Aluminum
Manufacturing: CNC Machined
Bearing Type: Double-Row Needle Bearings
Lubrication: Integrated Grease Fittings
Surface Finish: Anodized
Installation Position: Rear Suspension Linkage
Application: Enduro / Motocross / Cross-Country / Off-Road
Package Includes
1x Rear Suspension Lowering Link
Pre-installed Bearings
Pre-installed Grease Seals
Compatibility / Fitment
KTM
2025
Compatible with selected models including:
KTM 125 XC
KTM 125 SX
KTM 150 SX
KTM 250 SX
KTM 300 SX
KTM 250 XC
KTM 300 XC
KTM 250 SX-F
KTM 250 XC-F
KTM 350 SX-F
KTM 350 XC-F
KTM 450 SX-F
KTM 450 XC-F
Husqvarna
2025
Compatible with selected models including:
Husqvarna TE 125
Husqvarna TE 150
Husqvarna TE 250
Husqvarna TE 300
Husqvarna TX 300
Husqvarna FE 250
Husqvarna FE 350
Husqvarna FE 450
Husqvarna FE 501
Husqvarna FX 350
Husqvarna FX 450
GasGas
2025
Compatible with selected models including:
GasGas MC 125
GasGas MC 250
GasGas MC 300
GasGas MC 250F
GasGas MC 350F
GasGas MC 450F
GasGas EC 125
GasGas EC 250
GasGas EC 300
GasGas EC 350F
GasGas EC 450F
GasGas EC 500F
GasGas EX 250
GasGas EX 300
GasGas EX 250F
GasGas EX 350F
GasGas ES 350
GasGas ES 500
Why Use a Lowering Link?
A lowering link can provide:
Reduced rear ride height
Easier ground reach
Increased confidence when stopping
Easier low-speed maneuvering
More comfortable setup for shorter riders
Improved accessibility in technical terrain
Installation Notes
The 1.5" measurement refers to rear suspension lowering, not the total height reduction of the motorcycle.
The link is supplied with bearings and seals installed. The original center sleeve must be removed from the factory linkage and pressed into the new link.
Before installing the center sleeve:
Lubricate the bearings thoroughly
Make sure all components are clean
Install the original center sleeve correctly
After installation, lubricate the grease fittings approximately every 5-10 riding hours, especially when riding in mud, water, sand or dusty conditions.
Always follow the motorcycle service manual for mounting bolt torque specifications.
Suspension Setup Note
Lowering the rear suspension changes motorcycle geometry and handling characteristics.
Depending on the motorcycle and rider setup, raising the fork tubes slightly through the triple clamps may help maintain balanced front-to-rear geometry.
After installation:
Check suspension balance
Check sag settings
Check chain adjustment
Check side stand angle
Test the motorcycle carefully at low speed
Avoid aggressive high-speed riding until you are familiar with the modified handling characteristics.
Important Fitment Note
Please check your motorcycle model and production year before ordering.
Fitment may vary depending on specific model and suspension configuration.